ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench
ITM Fence for Festool MFT/3 style workbench

ITM Fence for Festool MFT/3 style workbench

Regular price
$104.99
Sale price
$99.99

A variety of fences or extrusions that act as one are available on the market that can be used with a guide rail for ripping wood. None of them is as accurate, robust, and universal as ours.

Under the guide rail part is not a separately connected extrusion with hardware that causes it to flex when your stock does not extend past it. Instead it's a precision machined to tight tolerances solid piece. After calibration, quick swapping of the stop from narrow cut to regular cut position and vice versa.

ITM Fence is an adaptation of the Incra Track System. Many of you have heard, saw or used this system. It offers many benefits over other fences:

  • robust extrusion design
  • multiple options on attaching a fence using screws, t-slots, etc
  • Incra patented saw tooth racks offer unparalleled indexing. Always spot on, no eye balling
  • the stop is made out of solid aluminum extrusion that locks itself into the saw tooth racks. Does not give-in as a plastic or 3d printed one
  • a sliding scale that eliminates fence adjustments that have etched scale

What we have added to the above:

  • low profile section under 0.5” that extends to 8” to accommodate under the guide rail support of your stock. No connectors required = no misalignments
  • marine grade stainless steel indexing rod that acts as a stop under the guide rail with brushed finish which protects your eyes from bothering light reflections

Our fence can be used as a standalone fence. Attached to our versatile Mighty Miter for square and miter cross cutting. If used with our Anchor dogs(1/4-20 slot), fence can be easily installed, removed, and installed again on your workbench when needed in a matter of a minute.

ITM fence is available in multiple options which will be expanded with the market need:

  1. ITM Fence 32C  - 36” ripping capacity with Stop and indexing rod
  2. ITM Fence 32 - 36” ripping capacity with indexing rod (no ShopStop)
  3. ITM Fence 820C - 915mm ripping capacity with Stop and indexing rod
  4. ITM Fence 820 - 915mm ripping capacity and indexing rod (no Incra ShopStop)

Note: Anchor dogs are not included with ITM Fences.

Click HERE for ITM Fence setup instructions.

Customer Reviews

Based on 2 reviews Write a review